6.1 Monitoring Panel

The Monitoring panel displays the work list of units and gives access to the basic features connected with tracking. The worklist can contain either all units available to the current user or just some of them. Units can be easily added and removed from the work list, which does not lead to their removal from the system.

To locate a unit on the map, click on its name in the worklist, as a result, the map centres and zooms in on the selected unit. To view additional information about the unit, hover the curser over its name in the list or the icon on the map.

• Related Articles

• Monitoring Overview

  Monitoring On the Monitoring tab, you can see the work list of units and the map on which you can track their movement in real time. Here you can find the basic features related to tracking units and their parameters. To open the Monitoring tab, ...

• Map

  Map The map is available regardless of which panel is activated. Usually, it takes up most of the screen. Units and their traces, geofences and other elements can be displayed on the map. Map size can be adjusted in relation to the work area and the ...

• Monitoring Options

  Monitoring Options All the options found in the Monitoring panel are described below. By default, the Monitoring panel includes the following options: address unit tracking motion state data accuracy connection state quick track properties clear list ...

• 6.2 Monitoring Options

  Unit Tracking:  Icon will turn green when unit active Motion State:  Unit is moving  Unit is moving – engine is on  Unit is stationery  Unit is stationery – engine is on  Last message received 1 hour ago – unit is moving  Last message received 1 hour ...

• Unit Properties

  Unit Properties The window of unit properties is shown when creating, editing, and copying a unit. In this window, you can specify different unit properties, configure access to the unit, create sensors, and so on. Depending on your access rights to ...