Live Stream

On this tab, you can watch live streams from the unit cameras and monitor the unit movement on the map.

Live streams are also available in the unit minimaps on the Monitoring tab. They show video only in standard quality.

Unit list

The work area contains a list of units for which cameras are configured. If the device type doesn't support the live stream feature, the unit is not available for selection and the icon   is displayed next to its name. If the feature is supported and the unit is online, the number of configured cameras is specified to the right of its name. The units that are offline are not available for selection and are marked with the icon . 

Above the list, you can see a dynamic filter to quickly find units by name, as well as the following features:

Icon	Action
/	Sort list items by name in forward or reverse alphabetical order.
/	Switch between the lists of units and their groups. To expand a group and see the units belonging to it, use the icon ; to collapse the group, use .

To watch live streams from the unit cameras, click on the unit name in the list.

Live streams

In the right part of the window, you can see live streams from all the cameras configured in the properties of the selected unit. To watch live streams only from certain cameras, click on the icon  and select the required cameras. To configure cameras in the unit properties, click on the icon .

When watching live streams, the following functions are available:

Icon	Function
	Play live streams. If you stop live streams, then after clicking on this icon they are played in real time again.
	Stop live streams.
/	Enable or disable high video quality. The availability of high quality and its features depends on the device type and its configuration. If the device doesn’t support quality change, this icon is not clickable ().
	Switch to full screen. You can open all live streams at once, or each one separately. To do this, click on this icon in the lower-right corner of the tab or live stream section, respectively. The icon is shown in the section when you point to it.
	Exit the full-screen mode. You can use the Esc key instead.
/	Switch the sound on or off. The icon is displayed when you point to a section of an individual live stream. You can play the sound from only one camera at a time. If a live stream from a certain camera is open in full screen mode, you can play the audio only from this camera. If the icon  is displayed after you start playing the live stream, its sound is unavailable.

If the live stream does not load within 30 seconds after selecting the unit, click on the block with the live stream to try again.

Map

On the Live stream tab, you can also monitor the unit movement on the map. To do this, click on the icon . In the open section, you can see the map centred on the unit location. The unit location is marked with the unit icon. Click on it to open the menu of monitoring options. Apart from the unit icon, you can also see the trace of the unit if the Unit trace layer is enabled in the menu of visible layers.

At the top of the map section, the unit speed and address are displayed.

You can scale the map using the buttons in the lower-left corner of the section. Moving the map is not possible. Switching to full-screen mode and exiting it is carried out in the same way as with live stream sections.

To hide the map section, click on the icon. The section is also hidden when you go to another tab.

If the unit is not in the work list of the Monitoring tab when you log in, then after opening the map section, the unit is added to this list.

• Related Articles

• Live Stream

  To work with the Live stream tab, the device type of the selected unit should support the function of live streaming. On this tab, you can watch live streams from the unit cameras, monitor the unit movement on the map, and configure cameras. ...

• Video Overview

  To access the Video tab, the Video monitoring and Commands services should be activated in the properties of the user account or billing plan. You can see only those units on the tab which have been added for billing in the management system. To work ...

• Function Overview

  FT Vision includes extensive functions and features as outlined below: 1. Real Time Monitoring a. Live GPS locations of vehicles b. Real-time live video feed c. Manual video feed recording d. Real-time two-way voice communication with driver 2. ...

• Overview

  FT Vision is a cloud-based, remote video monitoring application, which provides access to a live video feed from camera hardware as well as event-based video evidence triggered by harsh driving and other possible impacts. FT Vision also has a ...

• FT Vision Interface

  Menu Bar Top bar located across the top of the screen where you can view and editing personal settings. Live View Located in the menu on the left of the screen where you can monitor Live Video tracking of units. Cellular Located in the menu on the ...