Map
On the Map tab, you can see the location of all units from the worklist.
In addition to the same-name tab, the map is available in the properties of the unit, its history and on the Geofences tab. You can find the information about the map settings here.
Map Selection
To select a map, tap the icon 
in the upper left corner, make a selection and tap OK. You can also do this on the Settings tab (the Map source option).
in the upper left corner, make a selection and tap OK. You can also do this on the Settings tab (the Map source option).Working with the Map
You can zoom and rotate the map. You can use it to find your own location.
Zooming
Zooming the map is possible using the buttons (the Zoom buttons option must be activated in the settings):
- double tap or spread to zoom in
- single tap or pinch to zoom out
Map Rotating
Map rotating is possible using a rotation gesture with two fingers. To return the map to its original position, tap the compass icon.
Finding your own Location
To find your own location on the map, tap the icon 
. As a result, the map focuses on the location of the mobile device and the icon turns blue. When you move around the map and lose the location marker, the icon 
changes to 
, tapping which centres the map on the location of the mobile device.
. As a result, the map focuses on the location of the mobile device and the icon turns blue. When you move around the map and lose the location marker, the icon changes to , tapping which centres the map on the location of the mobile device.Map Menu
The map menu is available after a long tap on the map. The menu contains the following items:
- Create geofence
- Navigate to
Route Planning
A tap on Navigation to in the menu opens a list of the navigation applications installed on the device. Select the required one to plan a route.
The navigation application automatically uses the point you have tapped on the map as the endpoint of the route. The starting point is the location of the mobile device.
Units on Map
By default, the map is centered so so that you can see all the units on the screen. To quickly find the unit, use the dynamic search.
To view extended information about a unit, tap its icon. Tap the icon again to centre the map on the unit and update the data from the General information and History blocks.
The icons overlapping each other can be replaced by a common icon with a numerical indicator (the Icon grouping option). The indicator shows the number of grouped units. Tap te icon to see the list of units.
If the Unit movement direction layer is activated in Trackd and the Unit Icons option is enabled in application settings, the unit movement direction is shown next to the unit icon on the map.
Related Articles
Map
Map The map is available regardless of which panel is activated. Usually, it takes up most of the screen. Units and their traces, geofences and other elements can be displayed on the map. Map size can be adjusted in relation to the work area and the ...Map
In the Map mode, you can see your location. In addition, the widgets available to the user are also displayed here. To open the map, tap the icon in the navigation bar. When you tap the icon , you exit the map mode. To select the map, tap the ...Unit Presentation on Map
The following elements can be used to display units on the map: icons; motion state signs; additional elements. Unit icons By default, a unit is indicated on the map by an icon and a caption with its name. You can select the icon from the icon ...8.6. Using the Map
The track for the selected period is displayed on the map. It is generated together with the table. Select the message and click on it. The message will be highlighted in grey, the map will be centred on this point and a blue marker will be set ...6.1 Monitoring Panel
The Monitoring panel displays the work list of units and gives access to the basic features connected with tracking. The worklist can contain either all units available to the current user or just some of them. Units can be easily added and removed ...