Tracking

Tracking

In this section, you can see data on the location of the mobile device. Here you can enable or disable sending this data to the server using the switch.


By default, most of the section is hidden. Expand the section to see all the information it contains:
  1. location accuracy
  2. time when the last message was sent
  3. speed of the unit
  4. coordinates of the unit (to copy them, tap the icon  )
  5. altitude of the unit above sea level in meters
If the icon  is displayed in the section, the required settings or permissions are missing for the correct operation of the section. In this case, tap the section, follow the instructions and tap Continue in the window that opens. 

For the ability to disable sending positional data to the server, the Allow the user to turn off tracking in the mobile application option should be activated in the Trackd

    • Related Articles

    • Commands

      Commands A command is a request that can be sent to a unit. In response, the unit can send its coordinates, take a picture, activate an output, block engine, etc. Available commands depend on the type pf device used and its configuration. Methods of ...

    • Monitoring Options

      Monitoring Options All the options found in the Monitoring panel are described below. By default, the Monitoring panel includes the following options: address unit tracking motion state data accuracy connection state quick track properties clear list ...

    • Data Messages

      Data Messages Data messages are messages sent to the server from the unit device. As a rule, they contain information about the unit speed and location at the time of sending, the message generation time, and other parameters depending on the device ...

    • Data in Reports

      Data in Reports Time The time of completion/start/end of any state is displayed in the reports in the format specified in the General section of a report template. In the tables that include the duration of a state, the hours may not be combined into ...

    • Asset Location Sharing

      This feature in Pulse GPS allows you to share the location of an asset so that it can be viewed by a 3rd party without logging in.  Review this article and video to find out more. Steps 1. When you select an asset in the list (or click on its icon on ...