Install Guide – Trace5-TT

Device Provisioning

1. The Trace5-TT comes with a pre-installed SIM card and is provisioned on our GPS tracking platform.
   
2. Each device is checked for connectivity prior to being delivered to a client site.

WARNING: Do not disassemble the device, If the device is damaged, the power supply cables are not isolated or the isolation is damaged, DO NOT touch the device before unplugging the power supply.

Installation Tips

1. Standard installation is the connection of:
   
1. Power
   
2. Ground
3. Ignition source
2. The device should be mounted securely against a flat surface.
3. There should be no metal above the device.
4. The device should be mounted as far away from the radio and speakers as possible.

Wiring Harness

Colour	Function	Notes
Red	Power (Voltage Input)	8-30 Volts DC external power
Black	Ground	Main ground
Pink	Digital Input 1	Digital Input - 0 – 30 V DC
Blue	Digital Input 2	Digital Input - 0 – 30 V DC
White	Digital Input 3	Digital Input - 0 – 30 V DC
Yellow	Digital Input 4 (ACC)	Ignition Detection - 0 – 30 V DC
Grey	Analogue Input 1	0 – 30 V DC
Green	Analogue Input 2	0 – 30 V DC
Purple	Digital Output 1	Compatible with relay, buzzer & siren
Orange	Digital Output 2	Compatible with relay, buzzer & siren
White/Red	1-Wire Power	Power for 1-Wire devices
Green/Yellow	1-Wire Data	Data for 1-Wire devices

NOTE: Please refer to the vehicle or asset wiring information before wiring the device, to ensure that the correct wires are being connected.

Led Indicator

Mode	Pattern	Description
GNSS Fix Acquired	Once every second	Good cellular signal, no network connection
	Once every 4 seconds	Good cellular signal, connected to a network
	Always on, blinks once every 4 seconds	The link with the server is
	Once every 0.2 seconds	No Signal
GNSS Fix not Acquired	Twice every second	Good cellular signal, no network connection
	Twice every 4 seconds	Good cellular signal, connected to a network
	Always on, blinks twice every 4 seconds	The link with the server is
	Twice every 0.2 seconds	No Signal
Sleep Mode	Once every 10 seconds	The device is in sleep mode

Device Testing

On completion of the installation, please contact us on 1300 88 36 79 to allow us to check that the device is correctly functioning.

Please have the device IMEI number (printed on the device) and Customer Name ready.

• Related Articles

• Install Guide – Remote Worker

  Device Provisioning The Remote Worker comes with a pre-installed SIM card and is provisioned on our GPS tracking platform. Each device is checked for connectivity prior to being delivered to a client site. The device is not IP67 rated, so be cautious ...

• Install Guide – Rugged Tablet

  Device Provisioning The Rugged Tablet comes pre-installed with the relevant applications as per the customer requirements. The Rugged Tablet comes pre-configured to use the Accessory line of a vehicle to power and shutdown the tablet while in the ...

• Install Guide – Dash 4G

  Device Provisioning The Dash 4G comes with a pre-installed SIM card and is provisioned on our GPS tracking platform. Each device is checked for connectivity prior to being delivered to a client site. The device is not IP67 rated, so be cautious when ...

• Install Guide – AD Plus V2

  Device Provisioning The AD Plus V2 comes with a pre-installed SIM card and is provisioned on our GPS tracking platform, and video monitoring platform. The AD Plus V2 also come pre-installed with SD Card(s) for on-board video recording. Each device is ...

• Install Guide – AD Plus

  Device Provisioning The AD Plus comes with a pre-installed SIM card and is provisioned on our GPS tracking platform, and video monitoring platform. The AD Plus also come pre-installed with SD Card(s) for on-board video recording. Each device is ...